How to clean the well with your own hands: an overview of
Having a well in your own plot gives you independence from the central water supply. You get any amount of clean water you need at virtually no cost for agricultural needs and personal consumption. The main thing is to properly equip everything and carry out maintenance on time.
For proper care, it is important to know how to clean the well yourself. Regular and high-quality cleaning will significantly extend the life of all equipment and provide a guarantee of the purity of the consumed fluid. In this article, we will look at several ways to do this correctly.

The reasons
Before cleaning the well for water, it is necessary to determine the reasons that led to the breakdown..
They may be as follows:
- Irregular operation of the water supply system of the well, which leads to siltation.
Tip: drilling is not recommended in rarely visited cottages. Under such conditions, the risk of silting increases significantly, which makes the structure unprofitable.

- Errors in the process of land and installation work. In this case, it is worth thinking about hiring specialists to carry out the drilling of a well in order to avoid further problems associated with the operation.

- The change in direction of the aquifer. This is a force majeure situation that you can not influence in any way.
- The absence of protective mechanisms or their unsatisfactory work.
Tip: it is advisable to maintain the mining equipment as often as possible. This will avoid serious damage, the price of which will be much higher than the cost of maintenance.
Cleaning
How to clean the well at home? It can be pumped, blown or rinsed. It should also take into account the shape of the mine: straight or with a branch. Consider the five main methods to carry out restoration work.
Vibration pump

How to clean the well with a pump?
Very simple, especially in the case of a straight mine:
- At the bottom we lower the pump.
- Turn on the pump.
- All the garbage present at the bottom is absorbed by the equipment.
- After some periods of time, we pass clean water through the apparatus so that the working surfaces do not become soiled.
Tip: check the temperature of the pump regularly. If the body is hot, take a break, otherwise you burn the engine.
Bailer

How to clean a well in the country with its shallow depth and clogging? In this case, you will help out using zhelonka. But it should be borne in mind that if the distance to the bottom is more than thirty meters, then you need a winch and a strong partner.
Application instruction:
- A slug is a small pipe in which the upper end is closed with a fine mesh, and the lower one is covered with a bottom washer. Inside the device is a metal ball.

- Fasten the product to the cable and drop it into the mine.
- After reaching the bottom, we raise it by half a meter and sharply throw it down again.
- The iron ball rises for a certain period of time, letting in water, and then sinks into its place, closing the hole.
- Repeat the procedure several times.
- Raise the device up and clean it from debris.
Tip: it is recommended to build a tripod with a winch on the surface. This will greatly simplify the workflow.
In one go into the sink, about half a pound of sand is accumulated, which allows you to calculate the rate of clogging of the well. Itself can be purchased in specialized stores or build their own hands.
Mechanized cleaning

How to clean the well from sludge at a great depth?
The best way for deep mines is to use two simultaneously operating pumps in a specific sequence:
- We lower the deep vibration pump to the bottom, from where it feeds polluted water to the outside in a cleaning tank with a fine mesh.
- The second pump is installed on the surface, it poured the cleaned fluid under pressure, thereby agitating and diluting the silted area.
- We follow the pumping hose in the process, periodically shaking it. In case of a large accumulation of dirt, the equipment may burn out.
Fire engine

How to clean the water well in case of very large pollution. You can call a fire truck for this purpose. The pressure from the sleeve can eliminate virtually any stagnation and accumulation of debris, but also damage the filtration system of the well. You should also remember about the high cost of this event.
Airlift

How to clean the well from the clay using the law of Archimedes?
- We lower into the mine a water pipe.
- In the lower part of it we supply air by means of a compressor.
- Inside it creates a cocktail of air and foam.
- Water squeezes the contents, including garbage, up.
- We monitor the presence of water in the well.
Conclusion
Own well gives many advantages. Permanent and free water for watering crops and their own consumption. But we are 80% of this fluid. So this is a big plus for your site.
But sometimes silting of water can occur. In this case, urgently need to clean the well. To do this, you can choose one of the most suitable of the five methods provided. Take into account the nature and depth of the mine, the degree of pollution and its own capabilities.

The video in this article will acquaint you with additional materials on this topic.
Watch your well, on time carrying out maintenance, and it will smoothly please you with clean water.