How to find water on the site for the well

23-06-2018

Water supply

Natural water, which is not polluted and spoiled by substances unsuitable for drinking and cooking, is now worth its weight in gold. Over the years, mankind has invented a centralized way to supply water, but it is far from being available everywhere, so building a well on a plot of land is just as important as building a private house. However, for starters, you need to find out how to find water on the site for the well, because you can simply do - dig a hole, but in this case there is no guarantee that the source is located in this place. And after 2–3 m from it an aquifer may be located.

It is impossible to be 100% sure of the location of the well and the quality of the water. To make sure of your statements, it is better to ask your neighbors, to learn more about the area of residence, as well as other details about the land plot. In the virtual space a huge number of ways and methods of finding the source - video and detailed stories. In general, detection methods fall into three categories, namely:

Test drilling.
Biolocation method.
Exploration on the information of hydrogeological surveys.

Particular attention should be paid to the fact that the water, which lies shallow underground, is unsuitable for food purposes. Groundwater is what you need to look for when building a well.

The water, which is shallow (experts call it the term "water-pipe"), consists mainly of melt water and sewage. It can be applied only to industrial needs.

Biolocation

The most unusual method for finding groundwater is the biolocation method. He is to use a special fixture or vine. It turns out that with this method it is possible to find the source with your own hands. The very essence - devices help to find a place of high humidity on the surface. Grape the vine before use is dried, then picked up and bred to the side by 150 degrees. Thus, moving around the site, near the groundwater, the vine must lean to the ground. If this does not happen, it means that there is no groundwater at the site. True, the biolocation method shows the necessary results only between 5–6 in the morning and at night between 20–21 hours.

Plot relief

Another way to help a person find groundwater on his own is to analyze the topography of a site. For example, if there are ditches, depressions and other irregularities in the territory, this greatly increases the chance to find groundwater. Evidence of the presence of sources can also be growing on the site trees - spruce, alder, birch. Although, as mentioned earlier, it is impossible to say with absolute certainty that there is ground water or there is none.

There are some facts that tell the land owner about the minimum amount of water on the surface. For example:

A large number of plants such as acacia or beech.
The proximity of water intakes or quarries.
Near the site there is a precipice of the river.
The house is located near lakes, ponds or springs.
A small amount of water is always on elevations and in hilly areas.

Nature watching

Observation can be suggested as a third method. There are many sayings and proverbs that our ancestors have long used:

Observation of the fog. Early in the morning you should go to the site and carefully examine it. If there is groundwater that is located on the surface, then fog will be seen in this place. The thicker the fog, the closer the water source is.
For the sake of the purity of the experiment, you can also observe the behavior of animals in the hot season - in the summer. Horses and dogs in such a period everywhere seek shelter from the heat and heat. Therefore, they prefer to be in the wettest areas of the soil. Horses, at a particularly difficult time for them, can beat their hoof on the ground, while dogs can dig holes and lie in them.
Plants are also one of the main indicators of the qualitative composition of the soil. Some species will never grow where the groundwater is deep, because they are very fond of moisture. But if sorrel and nettle grows on the plot with a wild color - the owner must be calm, because this once again means that there is more than enough moisture on the surface.
From modern methods of detection - glass jars. In the morning, around the perimeter of the entire area, it is necessary to place the glass jars, neck to the bottom. The next day, you need to see in which condensate appeared, and in which not.

If you have any questions on the topic, then you can ask them to our specialist. Also for completeness, we suggest you view the video.

Video

This video clearly shows how water can be found at a well site using the dowsing method: