Polymer rings for a well: properties and installation

03-01-2018

Water supply

The main task in the manufacture of wells is to create walls of the structure that would not only be able to hold water, but would also tolerate the pressure of the rock from the outside. Given this, over the years, the construction of these devices have been developed various types of materials that can best cope with the task. However, lately polymer wells have become the most popular among them.

Amateur photo of a small ring of polymeric materials, which is used to create wells

Specifications and installation

First you need to say that these products are classified as plastic. However, unlike models made of polypropylene or similar materials, they have certain advantages. Especially polymer rings for wells are popular because they can withstand quite a lot of pressure, which means they can work at great depths (read also the article Well rings of concrete goods - making yourself).

A variety of similar products with a conical lid as an additional element.

Specifications

First of all, it is necessary to mention that, like all plastic products, these systems do not completely react with water. This completely eliminates the use of waterproofing, which reduces manufacturing costs and saves time.
Special attention is paid to the fact that polymer composite rings for wells are highly resistant to various types of acidic media, and can work in chemically active substances of a certain concentration. Due to this property, the life of such products increases significantly and is considered one of the largest.

When installing wells from this material, it is not necessary to use special equipment or accessories as in the presented photo.

Given that all devices of this type are made on a composite basis, they get a unique strength that allows not only to withstand heavy physical exertion, but to undergo a slight deformation. It is very convenient when installing on a movable soil.
It must be said that in order to connect all similar elements of the system, special locks or even threads are installed on the polymer well rings. So you can get a good sealing of the joints.
It is also worth mentioning the low weight of each individual element. The fact is that in comparison with products from reinforced concrete they are very light and do not need to use specialized equipment for their installation. At the same time, transportation is even easier, since it is possible to order transport with a small carrying capacity.

Polymer materials have a perfectly smooth surface, which has a positive effect on the performance of walls

If the construction of the well assumes the presence of additional elements in the form of a bottom or a lid, then such systems assume their execution from the same material. In this case, the installation manual advises to use parts produced by one company.
The main advantage of such rings is that their cost, taking into account transport costs and installation, is much lower than that of reinforced concrete products or brick structures..

Tip! It is necessary to say that these products have various purposes and sometimes the composition of the components of the material of their manufacture depends on it. That is why, before you make your choice, you should ask the seller for a certificate of conformity. This is especially important when creating buildings for the storage of drinking water.

Rings of this type have special grooves to ensure a tight connection with the additional use of sealant

Installation

If the installation of the rings is done by hand, then you should, first of all, decide on auxiliary equipment and technology. This is especially true for land works, since it is necessary to make a pit of necessary depth and at the same time its dimensions should be half a meter larger in radius. This is needed to create a bedding.
In the next stage, set the required number of rings, connecting them in the manner indicated in the instructions for the product. At the same time, professional masters recommend paying more attention to this document, since individual models have their own installation features.
Further, in the space between the rings and the earth, fine gravel and coarse-grained sand are poured. So you can get a kind of drainage protecting the structure from groundwater and rain.

Ready well from polymeric materials with the installed water pump and the hatch on a cover

Then install the cover of the well. Its price may seem too high, and the need for it unnecessary. However, in most systems, it has a load from the walls, and it can perform the functions of a pressure distributor.
At the final stage, a blind area and a protective fence are made at their discretion.

Tip! If the well is being repaired with the help of such rings, then their diameter is chosen a little less than the one that exists. Then simply inserted into the product, and the outer space is filled with sand, which is shed with water for compaction.

Most craftsmen prefer to install a small house over the well to protect and give a good appearance.

Conclusion

Watching the video in this article, you can get more detailed information about these types of rings, which are used in the manufacture or repair of wells. Also on the basis of the text that is presented above, it should be concluded that this material has unique qualities and is perfectly adapted for such conditions. In this case, the total cost of all work with the material may be even lower than when using other systems (see also the article Plastic rings for a well: advantages and installation).