Shower enclosures: types and characteristics

22-04-2018

Water supply

When using a shower or even a special nozzle on the hose, there is a high probability that water will fall on the floor. As a result, puddles are formed, which not only cause a certain discomfort, but also can cause a fall and injury. To avoid such situations, there are shower enclosures that come with some models of booths or are sold separately.

Amateur photo of the simplest system of this type mounted on the shower cabin

General concepts and characteristics

To begin with, it is necessary to say at once that such structures include frame products or screens. Ordinary curtains or curtains represent a different category, and will not be considered in this article. Therefore, if you make a shower enclosure with your own hands, then this should be taken into account and only strong systems should be used.

In some cases it is much easier to fabricate partitions and then install glass door barriers.

Purpose

First of all, such products were created in order to reduce the amount of water that accidentally falls on the floor or other surfaces during the shower process.. At the same time, it is not necessary to acquire large partitions to solve the problem. A shower enclosure of 90x90, which is made movable or folding, is quite suitable.

Matte products almost completely overlap the look and do not interfere with the access of light.

Some people prefer to take water treatments without worrying about where the spray will go.. Therefore, they often acquire more massive products, completely covering the entire perimeter or front part of the structure. As a result, it is better for them to use a shower enclosure 120x90 or more.
Another purpose of such systems is to limit the appearance of a person, hiding from him what is happening behind the screen. Given this, it is necessary to purchase designs with frosted glass or plastic inserts. It should be remembered that the shower enclosure 120x80 is considered the minimum able to cope with a similar task in terms of area.

Tip! Taking into account all the principles of using such systems, experts advise to acquire large structures that can cover the maximum possible space. This will significantly increase the level of comfort and allow you to use the product to the maximum.

Individual designs have simply stunning appearance that fits perfectly into the interior.

Design features

Most often, shower enclosures are made in the form of frame sections with an opaque material. This provides a certain mobility of the structure, without affecting its quality and strength. In this case, this technical solution allows you to completely release certain areas.

The use of frames greatly facilitates the process of installation and subsequent operation.

It should be noted that the dimensions of such individual panels can be very different. It doesn’t matter if a shower enclosure of 100x100 or another design is assembled from them. It all depends on the specific model, although experts advise choosing large items, since they look better and much more practical.

Most often, these shower systems are installed on special slides or rails. Therefore, if the shower enclosure is 80x80, then the length of these products should correspond to the dimensions. And they are mounted around the perimeter of the plumbing itself, which must be taken into account at the acquisition stage.

Tip! It is best to buy such systems from the same manufacturer that manufactured the bath or cabin. This will greatly facilitate installation and will solve all problems related to compatibility.

Graphic models of the principle of opening different systems

Selection and installation

For a start it is worth noting that a bath with a shower enclosure is usually purchased together and their installation is performed simultaneously. This allows you to solve a lot of problems associated with compatibility and some technical issues. However, there are situations when it is necessary to perform the installation on the plumbing, which has been installed for a long time.

Selection

If the shower enclosure is purchased, then it is necessary to pay attention to the dimensions of the product. It is very important to match the sides in width and angles. Therefore, usually buy designs specifically designed for a particular model.

Improperly selected product or poorly assembled installation can lead to operational problems.

It is also very important to choose the right fixation system. The fact is that some baths have a special design that allows the installation of special screens, although there are universal products that make it possible to perform the installation on almost any surface.
It must be said that the price of such systems can be quite large. Therefore, it is very important to take into account all the features of the product, ranging from the size and ending with the appearance, since during installation the damage or technological holes may appear.

Tip! The easiest way to try on such systems even when choosing plumbing. However, if this is not possible, then it is worth agreeing with the seller that the fitting will be completed locally, and if the product does not fit, then it can be returned or exchanged.

Installation

It is worth noting that there are so many models of such devices. All of them differ not only in appearance, but also in the way of installation. Therefore, the delivery always includes instructions that describe the entire process in detail.

Fixation with the use of special fasteners involves the use of a specific tool.

It is very important to remember that some models are sold unassembled, and they need to be assembled. Usually it lies in the fact that you need to make a frame and fix plastic or glass cloths in it. Moreover, if a shower enclosure is going to give, then it is better to use a film instead of them, which can be easily replaced.

Usually the fixation of such a design is performed using a special fastener, which is held on the wall. However, there are constructions that presuppose coupling with the bathroom itself, and its principle depends on the chosen model. There are also systems on the glue joint, although more often they are combined with mechanical locks.

Tip! If after installation there are large gaps or joints, then they are rubbed with a sealant to install shower enclosures.

Conclusion

After reading the video in this article, you can get more information about such fences and their varieties. Also, taking into account the text outlined above, it is worthwhile to conclude that it is very important to choose the right model of construction in order not to have problems with installation and operation.

It should be noted that the shower enclosures may have a variety of designs, suggesting a special approach to installation. Therefore, it is very important to find out all the details before the acquisition and only then make a choice.