Tank for a summer shower: characteristics of tanks made of

02-02-2018
Water supply

If you got a suburban area, a summer shower on it will be a great addition. You can make it yourself or buy ready-made, which is very difficult to assemble yourself. Today we will consider the first option, where the water storage tank plays a special role. You will learn how and when a plastic tank is used for a summer shower and a metal one, as well as how to install it correctly so that the design is as safe as possible.

Flat tank for outdoor shower with 200 liters of plastic with heating

What are the shower containers made of?

Below are the main materials:

Black or galvanized metal Often, this design has in the inner part of the heating element - heating elements. The installation process is to securely fasten the tank at the top of the shower and supply electricity to it. Now, even when the sun's rays do not provide enough energy, the water in the shower tank will always be warm. Many consider such a construction an excellent solution for the dacha, when there is an opportunity after garden work in the spring and in the autumn to take a shower. The temperature can be adjusted by a thermostat or a thermal sensor. The capacity of the container is as follows:
  • the pump constantly adds water to it when the corresponding level drops;
  • however, there is always hot water in it.

The main disadvantages are:

  • no thermal insulation;
  • The efficiency of heating elements is very low;
  • unattractive appearance;
  • burnout of the heating element due to low water level in the tank;
  • continuous operation of the pump.
Stainless steel
  1. Usually purchased, not made by hand.
  2. Standard volume is 100-200 liters.
  3. It may have a heating element, because of which there must always be water in the tank.
  4. Suitable for the simplest design of the shower.
  5. It is flat, so it requires less working height. For example, it will look good in rooms with low ceilings.
  6. In terms of functionality, it can be compared with a boiler.

The disadvantage is that if there is a heating element, a permanent water supply is required.
Plastic
  1. The mass of the tank is small, so it is often not taken into account when calculating the supports.
  2. Often inside the set of heaters, but you can use it for purpose and without it.
  3. Among the shortcomings - the heating elements must be disconnected periodically, otherwise they will quickly fail.
  4. Does not rust.
  5. Durable in operation.
  6. Does not require constant water supply.
Plastic summer shower tanks are lightweight

Above were considered containers for the shower, which can be used even when the weather outside is far from favorable. If the sun is active in the summer, the heating elements can not be used, the water will already heat up.

In this case, there is not much difference which tank will be used for water. The basic rule is that its volume should be enough for everyone, otherwise there will simply be no warm water left.

Tip: it is best to use a flat tank, as it provides a good head. Barrel, of course, cheaper, but not so convenient to use.

Simple summer shower with water tank

Characteristics of tanks

Plastic containers are more practical than metal ones, since their weight is significantly lower, while their price is higher. Below we consider all the features in more detail.

Of steel

Their form is usually square and flat, the volume of tanks is 50-200 l.

The design includes such details:

  • there is a water supply hole on top, it is covered with a lid;
  • devices for indicating the level of liquid in the tank;
  • Drives - necessary to connect water supply hoses to them;
  • faucet with shower head for water during the shower.

Advantages of metal tanks:

  • long term use;
  • reliability;
  • low cost.

The disadvantage is the instability before rust. Therefore, it has to periodically paint over inside.

Galvanized steel

There is a great demand for containers, for the production of which ordinary metal with a thin surface zinc layer is used. It was he who protects the product from rust. Although their cost is higher than the previous ones, the tanks can be used much longer.

The form they may have:

  • flat;
  • square;
  • round;
  • oval.
In the photo - galvanized steel shower tank

The minimum capacity is 40 liters, the maximum 200 liters.

The advantages of galvanized tanks are:

  • term of use exceeds 10 years;
  • it is possible to install TENY and temperature regulators;
  • heat capacity of products is higher than steel.

They consist of:

  • cover through which the tank is filled with water;
  • ball valve;
  • shower head;
  • fittings for connecting the hose to the water inlet.
Stainless steel shower tub 250 liters

Stainless steel

One of the best options for summer cottage. Added chrome plating does not allow rust to develop. Therefore, it is not necessary to periodically paint such tanks or apply a corrosion-resistant coating on them.

Although its cost is high, but this is justified by the advantages of the design:

  • the weight of the tank is small, since its walls are not thicker than 1 mm, so it will not additionally load the shower structure;
  • can operate for 20 years or more;
  • the water in the tank does not change its color, does not bloom and does not stagnate even for a long time;
  • stainless steel - durable and reliable;
  • You can order a tank of any size.
The mixing of water in the summer shower tank occurs naturally.

From plastic

Inexpensive and most popular containers for summer showers today.

The advantages of such products are:

  • corrosion resistance;
  • ease of installation;
  • ease of transportation;
  • water can be stored in the tank for a long time and does not change its characteristics;
  • ecological cleanliness;
  • resistance to temperatures and UV rays;
  • the term of operation is long.

Available in various shapes and volumes.

Plastic tanks for heated summer showers are easily installed by yourself

Making a shower tank by yourself

If you have a desire for material and time, you can not buy a finished structure, but make it yourself. The simplest and easiest option is to use a plastic water tank. Her weight is small, so the installation will not cause problems.

At the first stage, the instruction requires to install a tap for a tap with a watering can in the bottom of the tank. The latter will provide not only a uniform supply of water, but also allow you to save it, so often it will not be necessary to fill it.

Installation of a tank for a summer shower and design features

Choose a way to add water to the tank:

  • a bucket using the ladder;
  • installation of the hose connected to the water supply.

Make a shower. In this case, the main advantage of the design is the minimum financial expenditure.

Place the tank on top of it. Do not forget that the supports must withstand the weight of the tank with water.

Requirements

  1. Try to use a dark color tank., so that it attracts solar energy to itself, then the water will heat up faster.
  2. For 5 people, it is enough to purchase a capacity of 100 liters..
  3. When choosing a material for a tank, consider its pros and cons.. For example, in metallic water it will stay warm longer, it requires annual maintenance, and its duration of use is shorter than plastic.
  4. If TEN is installed in the tank, it is necessary to equip it with an automatic water supply device., so that the heating element does not fail.

Tip: if you build a PVC greenhouse under the tank, you can raise the water temperature in it by 5-8? ะก and protect it from the wind.

Conclusion

The use of summer shower in the country increases its functionality. Before installing it, you should take care of the material of the storage tank, which can be made of steel or plastic.

You want you to not depend on the ambient temperature - then you need a tank for a heated summer shower. In this case, even if the sun does not come out due to clouds, the water in the tank will be at the right temperature. The video in this article will provide an opportunity to find additional information on the above topic.

Categories