Washing machine under the sink and its features

Owners of small standard apartments often have to look for non-standard solutions to increase the usable area in their homes. An example of this is the use of washing machines that are installed under the sink or sink. Below we consider the features of a washing machine under the sink, as well as get acquainted with all the advantages and disadvantages of such a solution.

Features of a compact washing machine

Installing a washing machine under the sink allows you to save quite a lot of useful space, since the space under this sanitary device is very rarely used with benefit, while the machine requires a lot of space.

However, it is necessary to take into account that in order to implement such a solution, you will need a special sink, which has a different drainage system, as well as a special washing machine. It differs from the usual more compact size:

If you install a washing machine under the sink of normal size, then the sink will be quite uncomfortable to use, as the machine will not allow you to get close to the plumbing, besides the sink will be very high.

Among other features of such devices can be identified:

• Download implemented exclusively in front.
• As a result of a more compact size, such machines are designed for washing a small amount of laundry. As a rule, the maximum amount that can be loaded into machines is limited to 3 - 3.5 kg.
• Water connections are often located on the side, which allows you to move the device close to the wall.

Functionally, the washing machine under the sink does not differ from the standard automatic models, in particular, they have about 10 programs, including washing in cold water, careful washing, etc. I must say that many people are confident in higher power consumption of compact machines, as well as in low quality their washing.

A few years ago, this was true, however, technologies are constantly evolving, thanks to which modern compact machines are not inferior in terms of these indicators to full-size counterparts. Therefore, when choosing a model, attention should be paid to all indicators.

The leading manufacturers of such machines are:

• Electrolux,
• Eurosoba,
• Candy
• Zanussi, etc.

They have proven themselves to be reliable, functional and efficient.

Tip! Many models have a special eco-valve, which allows you to save powder. In addition, a useful feature is the auto-weighing system, which saves water and electricity when the machine is not fully loaded.

Merits

A washing machine under the sink has only one serious advantage - it saves space, which is a defining moment in small apartments. Due to this, the device will not block space in the bathroom, spoil the appearance of the corridor or take away useful meters in the kitchen.

disadvantages

As for the shortcomings, they are also available:

• The quality of the spin is inferior to the full-fledged machines, and this disadvantage is observed in models of all manufacturers.
• Plumbing fixtures designed to be installed above the washing machine are often clogged, due to the design feature of the drain.
• The cost is higher than the standard devices.
• Washing machines complete with sinks are rarely available, so after purchasing a machine, you have to select a washbasin for suitable parameters, and if you buy products individually, their total price will be higher than the cost of the kit.

Tip! Compromise is the furniture under the washing machine with a sink, in which the machine is located on the side of the sink. In this case, you can use the usual sink, and, place under it usually has shelves for different things. The very same washing machine is hidden in another section of the drawer.

As we can see, the shortcomings are not critical, therefore they are unlikely to influence the decision to install the washer under the washbasin in the conditions of total saving of free space.

Installation Features

So, we got acquainted with the features of compact washing machines. Now consider how to install a washing machine under the sink. First of all, you will need to purchase a suitable sink. Its depth must be at least 58 cm, in addition, there is a requirement for a drain, which must be located behind.

At present, the following manufacturers produce such sinks:

• Pilot - Russia;
• Messenger - Russia;
• Ido - Finland.

Tip! For many models of machines you can buy removable plastic panels of different colors. This will allow most harmoniously enter the washing machine into the interior of the kitchen or bathroom.

It should immediately be said that in general the process of connecting the machine and the plumbing itself does not differ from the traditional one. However, there are some features that you need to know before you put the washing machine under the sink.

It should be noted that the "water lilies" often do not have holes for the mixer, which is done in order to save space under the sink. Therefore, they must be installed either next to the bathroom, so that it is possible to use one faucet for two plumbing fixtures, or install the faucet on the wall.

So, the installation process is as follows:

• The first step is to choose the installation location.. For example, a washing machine under the sink in the bathroom can stand openly, as its appearance is unlikely to spoil the appearance of the interior of the bathroom. If it is decided to install appliances in the kitchen, then you will need a cabinet with a sink for a washing machine, which will hide it and thus preserve the integrity of the interior of the room.

• If the sink will be mounted, such as "water lily", it is necessary to correctly mark its location. This parameter depends on the height of the machine, taking into account the fact that the distance between it and the lower part of the “water lily” sink should be about 15-20 centimeters.
• After fixing the sink to the wall, you must install a siphon and connect your own drain to the sewer. The connection must be made qualitatively so that the drain hose does not fall out as a result of vibration. Moreover, the drain must be placed behind the machine, and not above it. I must say that for the "lily" should use a special siphon. To find such a siphon for sinks can be quite problematic, since it is not sold in every plumbing store. Corrugation is also prohibited.

• After that, the machine itself is installed and connected to the communications.. In order for the device not to "jump", during installation it is necessary to adjust its position with the help of a building level. If necessary, you can put a rubber mat.
• Be sure to pay attention to electrical safety, namely, to ground all nodes.

Note! The washbasin installed above the washing machine should completely cover it. If it is smaller, water will fall on the surface of the apparatus, which may cause a short circuit.

Here, perhaps, all the basic instructions that must be followed when installing the washing machine under the sink.

Conclusion

A compact washing machine for installing under the sink is an excellent solution to save space, however, it should be borne in mind that such an arrangement is not without some drawbacks. Therefore, it is hardly advisable to implement it in cases where it is possible to install a full-size machine.

From the video in this article, you can get some additional information on the designated topic.